S6/S7/RS7 C7 Screen Bracket
A printed bracket that holds a Waveshare 8.8" DSI touchscreen in the DVD slot of the Audi S6 / S7 / RS7 (C7). Mounting hardware included.
Max 10 per order
- Made in the USA
- Printed in ASA
- Hardware included
- Secure Shopify checkout
Build your own
SpooledOS Community is free and open source. The guide walks you through the Pi, the screen, the wiring and a one-command install.
Read the build guideWhat it does
If you're building your own dash from the SpooledOS Community guide, this is the part that gets the screen into the car. The screen screws to it, and it fits into an opening the car already has.
- Made for the Audi S6 / S7 / RS7 (C7)
- One blade slides into the DVD slot and a second into the trim gap above it, and the two hold it in place.
- Holds the 8.8-inch screen
- Made for the Waveshare 8.8" DSI touchscreen, the screen the Community build uses.
- Printed in ASA
- ASA stands up to heat and sun, so it keeps its shape in a car parked outside, where PLA would soften.
- Nothing to drill
- It fits into openings the car already has.
Specs
| Fits | Audi S6 / S7 / RS7 (C7) |
|---|---|
| Holds | Waveshare 8.8" DSI touchscreen (1920×480) |
| Goes | In the DVD slot |
| Material | ASA |
| Hardware | Included |
| Screen | Not included |
| Made in | USA |
Spooled is independent and not affiliated with Audi or Waveshare. Those names are used to describe compatibility.
Install
The screen screws to the bracket, and the bracket goes in the DVD slot.
- Screw the screen to the bracket.
- Feed the screen's ribbon cable through to where the Pi will sit.
- Slide the lower blade into the DVD slot and the upper one into the trim gap, and push it home.
In the box
- Printed screen bracket
- Mounting hardware
Ships from the US. Shipping is calculated at checkout. Problem with your order? Send us a request and we'll sort it out.
Questions
No. The bracket holds a Waveshare 8.8" DSI touchscreen, which you buy separately. The Community guide lists everything else you need for the build.
No. Every Spooled dash for the Audi S6 / S7 / RS7 (C7) comes with its mount. This is for your own build, or a spare.
No. SpooledOS Community is free and open source; the printed parts are what we sell, and they're how Spooled pays for the work.
ASA. It's made for parts that live outdoors, so heat and sun through the windshield don't bend it.